View ARD32024_7217286.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

rd (ard) specifications contact #1 factors such as heating of the connected connector in?ence the high frequency characteristics; therefore, please verify under actual conditions of use. #2 18 to 26.5 ghz characteristics apply to the 26.5 ghz type only. 13ghz, 18ghz, 26.5ghz coaxial switch rd coaxial switches (ard) arrangement spdt transfer contact material gold initial contact resistance (by voltage drop 6v dc 1a) max. 100m ? rating contact input power* 1 120w 3ghz (v.s.w.r. 1.15 or less, no contact switching, ambient temperature 40 c [spdt], 25 c [transfer], 25 c [sp6t]) #1 indicator rating contact rating max. 30v 100ma initial contact resistance (measured by 5v 100ma) max. 1 ? high frequency characteristics (impedance 50 ? ) to 1ghz 1 to 4 4 to 8 8 to 12.4 12.4 to 18 18 to 26.5 #2 v. s.w .r. (max.) 1.1 1.15 1.25 1.35 1.5 1.7 insertion loss (db, max.) 0.2 0.3 0.4 0.5 0.8 isolation (db, min.) 85 80 70 65 60 55 expected life (min. operation) mechanical (at 180 cpm) 5 10 6 electrical (at 20 cpm) 5 10 6 (5w, to 3ghz, impedance 50 ? , v.s.w.r.; max. 1.2) arrangement sp6t contact material gold initial contact resistance (by voltage drop 6v dc 1a) max. 100m ? rating contact input power* 1 120w 3ghz (v.s.w.r. 1.15 or less, no contact switching, ambient temperature 40 c [spdt], 25 c [transfer], 25 c [sp6t]) #1 indicator rating contact rating max. 30v 100ma initial contact resistance (measured by 5v 100ma) max. 1 ? high frequency characteristics (impedance 50 ? ) to 1ghz 1 to 4 4 to 8 8 to 13 v. s.w .r. (max.) 1.1 1.15 1.25 1.35 insertion loss (db, max.) 0.2 0.3 0.4 isolation (db, min.) 85 80 70 65 expected life (min. operation) mechanical (at 180 cpm) 5 10 6 electrical (at 20 cpm) 5 10 6 (5w, to 3ghz, impedance 50 ? , v.s.w.r.; max. 1.2) new rohs directive compatibility information http://www.nais-e.com/ features 1. high frequency characteristics (impedance 50 ? ) * 18 to 26.5ghz characteristics can be applied 26.5ghz type only (spdt, transfer) 2. spdt, transfer and sp6t type is av ailable 3. high sensitivity nominal operating power: 840 mw (spdt/sp6t, failsafe type) 1,540 mw (transfer, failsafe type) 4. long life: 5 10 6 5. with termination type is available (sp6t) 6. + com type is available typical applications wireless and mobile communication ?cellular phone base stations ?ampli?r switching digital broadcasting ?broadcasting relay station ?broadcasting equipment measurement instruments ?all types of inspection equipment frequency (ghz) to 1 1 to 4 4 to 8 8 to 12.4 12.4 to 18 18 to 26.5* v. s . w .r. (max.) 1.1 1.15 1.25 1.35 1.5 1.7 insertion loss (db. max.) 0.2 0.3 0.4 0.5 0.8 isolation (db. min.) 85 80 70 65 60 55 all rights rese r v ed c o p y r i gh t matsushita elect r ic w o r k s , ltd.
rd (ard) characteristics remarks * 1 please verify the usability of input power under actual conditions because heat generated from connectors can in?ence connection. * 2 measurement at same location as ?nitial breakdown voltage section. * 3 detection current: 10ma * 4 nominal operating voltage applied to the coil, excluding contact bounce time. * 5 half-wave pulse of sine wave: 11ms, detection time: 10ms. * 6 half-wave pulse of sine wave: 11ms * 7 detection time: 10ms * 8 refer to 4. conditions for operation, transport and storage conditions in notes (page 42). ordering information spdt transfer initial insulation resistance* 2 min. 1,000 m ? (at 500 v dc) initial breakdown voltage* 3 between open contacts 500 vrms for 1 min. between contact and coil 500 vrms for 1 min. between contact and earth terminal 500 vrms for 1 min. between coil and earth terminal 500 vrms for 1 min. operate time* 4 (at 20 c) max. 15ms max. 20ms shock resistance functional* 5 min. 500 m/s 2 destructive* 6 min. 1,000 m/s 2 vibration resistance functional* 7 10 to 55 hz at double amplitude of 3mm destructive 10 to 55 hz at double amplitude of 5mm conditions for operation, transport and storage* 8 (not freezing and condensing at low temperature) ambient temp ?5 c to +85 c ?7 f to +185 f humidity 5 to 85% r.h. unit weight (approx.) 50g 1.76oz 110g 3.88oz sp6t initial insulation resistance* 2 min. 1,000 m ? (at 500 v dc) initial breakdown voltage* 3 between open contacts 500 vrms for 1 min. between contact and coil 500 vrms for 1 min. between contact and earth terminal 500 vrms for 1 min. between coil and earth terminal 500 vrms for 1 min. operate time* 4 (at 20 c) max. 20ms shock resistance functional* 5 min. 500 m/s 2 destructive* 6 min. 1,000 m/s 2 vibration resistance functional* 7 10 to 55 hz at double amplitude of 3mm destructive 10 to 55 hz at double amplitude of 5mm conditions for operation, transport and storage* 8 (not freezing and condensing at low temperature) ambient temp ?5 c to +85 c ?7 f to +185 f humidity 5 to 85% r.h. unit weight (approx.) 320g 11.29oz note: sealed types are also available. (spdt type only) product name rd frequency 1: to 18ghz (spdt) 2: to 18ghz (transfer) 3: to 13ghz (sp6t) 5: to 26.5ghz (spdt) 6: to 26.5ghz (transfer) operating function 00: failsafe 20: latching 51: latching with ttl driver (with self cut-off function) (spdt, transfer) nominal operating voltage, v dc 4h: 05: 12: 24: 4.5 (failsafe, latching type only) 5 (latching with ttl driver type only) 12 24 operation terminal nil: c: solder terminal connector cable (spdt type only) hf data attached nil: q: no hf test data attached hf test data attached rd aex. all rights rese r v ed c o p y r i gh t matsushita elect r ic w o r k s , ltd.
rd (ard) types 1. spdt 1) solder terminal note: standard packing; carton: 1 pc. case: 20 pcs. 2) connector cable note: standard packing; carton: 1 pc. case: 10 pcs. 2. transfer 1) solder terminal note: standard packing; carton: 1 pc. case: 10 pcs. 3. sp6t note: standard packing; carton: 1 pc. case: 5 pcs. operating function nominal operating v oltage, v dc 18ghz type 26.5ghz type no hf datasheet attached hf datasheet attached no hf datasheet attached hf datasheet attached failsafe 4.5 ard1004h ard1004hq ard5004h ard5004hq 12 ard10012 ard10012q ard50012 ard50012q 24 ard10024 ard10024q ard50024 ard50024q latching 4.5 ard1204h ard1204hq ard5204h ard5204hq 12 ard12012 ard12012q ard52012 ard52012q 24 ard12024 ard12024q ard52024 ard52024q latching with ttl driver (with self cut-off function) 5 ard15105 ard15105q ard55105 ard55105q 12 ard15112 ard15112q ard55112 ard55112q 24 ard15124 ard15124q ard55124 ard55124q operating function nominal operating v oltage, v dc 18ghz type 26.5ghz type no hf datasheet attached hf datasheet attached no hf datasheet attached hf datasheet attached failsafe 4.5 ard1004hc ard1004hcq ard5004hc ard5004hcq 12 ard10012c ard10012cq ard50012c ard50012cq 24 ard10024c ard10024cq ard50024c ard50024cq latching 4.5 ard1204hc ard1204hcq ard5204hc ard5204hcq 12 ard12012c ard12012cq ard52012c ard52012cq 24 ard12024c ard12024cq ard52024c ard52024cq latching with ttl driver (with self cut-off function) 5 ard15105c ard15105cq ard55105c ard55105cq 12 ard15112c ard15112cq ard55112c ard55112cq 24 ard15124c ard15124cq ard55124c ard55124cq operating function nominal operating v oltage, v dc 18ghz type 26.5ghz type no hf datasheet attached hf datasheet attached no hf datasheet attached hf datasheet attached failsafe 4.5 ard2004h ard2004hq ard6004h ard6004hq 12 ard20012 ard20012q ard60012 ard60012q 24 ard20024 ard20024q ard60024 ard60024q latching 4.5 ard2204h ard2204hq ard6204h ard6204hq 12 ard22012 ard22012q ard62012 ard62012q 24 ard22024 ard22024q ard62024 ard62024q latching with ttl driver (with self cut-off function) 5 ard25105 ard25105q ard65105 ard65105q 12 ard25112 ard25112q ard65112 ard65112q 24 ard25124 ard25124q ard65124 ard65124q operating function nominal operating v oltage, v dc 13ghz type no hf datasheet attached hf datasheet attached failsafe 4.5 ard3004h ard3004hq 12 ard30012 ard30012q 24 ard30024 ard30024q latching 4.5 ard3204h ard3204hq 12 ard32012 ard32012q 24 ARD32024 ARD32024q all rights rese r v ed c o p y r i gh t matsushita elect r ic w o r k s , ltd.
rd (ard) coil data (at 20? 68? ) 1. spdt 1) failsafe type 2) latching type 3) latching with ttl driver type (with self cut-off function) 2. transfer 1) failsafe type 2) latching type 3) latching with ttl driver type (with self cut-off function) 3. sp6t 1) failsafe type 2) latching type nominal operating voltage, v dc nominal operating current, ma (+10%/?5%) nominal power consumption, mw 4.5 186.7 840 12 70.0 840 24 40.4 970 nominal operating voltage, v dc nominal operating current, ma (+10%/?5%) nominal power consumption, mw 4.5 155.6 700 12 62.5 750 24 37.5 900 nominal operating voltage, v dc ttl logic level (see ttl logic level range) switching frequency on off 5 2.4 to 5.5v 0 to 0.5v max. 180 cpm (on time : off time = 1 : 1) 12 24 nominal operating voltage, v dc nominal operating current, ma (+10%/?5%) nominal power consumption, mw 4.5 342.2 1540 12 128.3 1540 24 69.6 1670 nominal operating voltage, v dc nominal operating current, ma (+10%/?5%) nominal power consumption, mw 4.5 266.7 1200 12 104.2 1250 24 58.3 1400 nominal operating voltage, v dc ttl logic level (see ttl logic level range) switching frequency on off 5 2.4 to 5.5v 0 to 0.5v max. 180 cpm (on time : off time = 1 : 1) 12 24 nominal operating voltage, v dc nominal operating current, ma (+10%/-15%) nominal power consumption, mw 4.5 186.7 840 12 70.0 840 24 40.4 970 nominal operating voltage, v dc nominal operating current, ma (+10%/-15%) nominal power consumption, mw 4.5 set: 155.6 / reset (all): 933.6 set: 700 / reset (all): 4,200 12 set: 62.5 / reset (all): 375.0 set: 750 / reset (all): 4,500 24 set: 37.5 / reset (all): 225.0 set: 900 / reset (all): 5,400 all rights rese r v ed c o p y r i gh t matsushita elect r ic w o r k s , ltd.
rd (ard) ?operating voltage range 1) failsafe type 2) latching type 3) latching with ttl driver type (with self cut-off function) 0 4 32 24 28 8 16 12 20 0 2 16 12 14 4 8 6 10 ?5?0 0?0 20 ambient temperature c 12 v 0 0.75 6 4.5 5.25 1.5 3 2.25 3.75 4.5 v 24 v 8540 60 nominal voltage allowable range for use recommended operation voltage range recommended release voltage range 0 4 32 24 28 8 16 12 20 0 2 16 12 14 4 8 6 10 ?5?0 0?0 20 8540 60 ambient temperature c 12 v 0 0.75 6 4.5 5.25 1.5 3 2.25 3.75 4.5 v 24 v allowable range for use recommended set/reset voltage range nominal voltage 0 4 32 24 28 8 16 12 20 0 2 16 12 14 4 8 6 10 ?5?0 0?0 20 8540 60 ambient temperature c 12 v 0 0.83 6.67 5 5.83 1.67 3.33 2.5 4.17 5 v 24 v nominal voltage allowable range for use recommended set/reset voltage range 4) ttl logic level range note) please consult us for use that is outside this range. ambient temperature c 0 0.5 5.5 4 3 2.4 5 1 2 ?5?0 0?0 20 8540 60 on off all rights rese r v ed c o p y r i gh t matsushita elect r ic w o r k s , ltd.
rd (ard) dimensions mm inch ? + com type is available 1. spdt 1) solder terminal tolerance: 0.3 .012 coil serial no. indicator comnc no gnd + 11.2 .441 3.5 .138 3.5 .138 2.0 .079 3.5 .138 solder terminal 4.3 .169 39.0 1.535 7.3 .287 4.5 .177 2.1 .083 3-sma connector 2-3.1 dia. 2-.122 dia. 2-2.4 dia. 2-.094 dia. 34.0 1.339 11.2 .441 22.4 .882 30.0 1.181 7.0 .276 0.3 .012 7.2 .283 13.2 .520 failsafe latching latching with ttl driver (with self cut-off function) gnd nocom coil serial no. indicator comnc no gnd + nc gnd 21 com coil 1 coil 2 serial no. indicator coil com 12 gnd 2 1 coil terminal indicator terminal logic 2 gnd 21 com v logic 1 serial no. 21 1 com coil gnd 2 v indicator all rights rese r v ed c o p y r i gh t matsushita elect r ic w o r k s , ltd.
rd (ard) mm inch 2) connector cable comnc no gnd + coil indicator serial no. 1 pin no. 2345 6789 d-sub connector pin contact type 12.55 .494 25.0 .984 30.8 1.213 3.05 dia. .120 dia. 5.95 .234 1.2 .047 pvc wires 110.0 10 4.331 .394 39.0 1.535 7.3 .287 4.5 .177 2.1 .083 2-3.1 dia. 2-.122 dia. 2-2.4 dia. 2-.094 dia. 3-sma connector 11.2 .441 22.4 .882 13.2 .520 30.0 1.181 34.0 1.339 7.2 .283 tolerance: 0.3 .012 failsafe latching latching with ttl driver (with self cut-off function) comnc no gnd indicator terminal coil terminal indicator terminal coil terminal coil 2 coil 1 com 12 gnd indicator terminal coil terminal logic 1 logic 2 v com 12 gnd ? + com type is available indicator coil pin no. 123456789 fail safe nc com no gnd + latching 1 com 2 gnd 1 2 latching with ttl driver ?com2v gnd logic 1 logic 2 all rights rese r v ed c o p y r i gh t matsushita elect r ic w o r k s , ltd.
rd (ard) ? + com type is available 2. transfer mm inch j4j3 j2j1 0.30 .012 2.00 .079 5.08 .200 5.08 .200 5.08 .200 solder terminal 4-sma connector 3-3.80 dia. 3-.150 dia. 45.70 1.799 15.24 .600 39.0 1.535 7.2 .283 16.2 .638 16.2 .638 32.0 1.260 32.0 1.260 55.5 2.185 9.65 .380 20.3 .799 10.15 .400 max. 5.0 .197 9.65 .380 1 to 1.5 .039 to .059 j1 j2 j4 j3 indicator serial no. com no nc + gnd coil tolerance: 0.3 .012 fail safe nc: j1-j2, j3-j4 no: j1-j3, j2-j4 latching pos1: j1-j2, j3-j4 pos2: j1-j3, j2-j4 latching with ttl driver pos1: j1-j2, j3-j4 pos2: j1-j3, j2-j4 j2 j4 j1 j3 failsafe latching latching with ttl driver (with self cut-off function) no nc com gnd coil terminal indicator terminal 1 2 gnd 2 com 1 coil terminal indicator terminal v gnd logic 1 logic 2 1 com 2 coil terminal indicator terminal all rights rese r v ed c o p y r i gh t matsushita elect r ic w o r k s , ltd.
rd (ard) ? 1. with termination type is available. 2. + com type is available. mm inch 3. sp6t japan coil j1 j6 j3 com 63 5 serial no. in made 4 j2 j4 j5 com 1 (bottm view) ind gnd 5 1 4 26 3 2 j3 j5 j2 j1 j6 com j4 7-sma jack connector 4-4.5 dia. 4-.177 dia. 80.0 3.150 7-5.08 7-.200 66.0 2.598 78.0 dia. 3.071 dia. 56.0 dia. 3.0 .118 2.205 dia. max. 4.5 max. .177 7.2 .283 39.5 1.555 80.0 3.150 66.0 2.598 25.4 1.000 failsafe type latching type indicator terminal gnd 6 j6 62 j2 1 2 com j1 com 1 coil terminal 2 36 24 1 5 gnd ind (bottm view) 1 com j5 j4 j2 4 made in serial no. 5 36 com j3 j6 j1 coil japan *reset (all) 1 (bottm view) ind gnd 5 1 4 26 3 26 43 5 serial no. in made japan com coil j1 j6 j3 j2 com j4 j5 r indicator terminal gnd 6 j6 62 j2 1 2 com j1 com 1 coil terminal *r all rights rese r v ed c o p y r i gh t matsushita elect r ic w o r k s , ltd.
rd (ard) reference data 1-(1). high frequency characteristics (spdt) sample: ard10012 measuring method: measured with hp network analyzer (hp8510). ?v.s.w.r. ?insertion loss ?isolation 1.1 1.0 1.9 1.2 1ghz 4ghz 12.4ghz8ghz 18ghz 26.5ghz 1.4 1.5 1.6 1.7 1.8 1.3 frequency v.s.w.r. maximum typical 0.8 0.7 1.0 0.9 0 0.2 0.1 0.6 0.4 0.5 0.3 1ghz 4ghz 12.4ghz8ghz 18ghz 26.5ghz frequency insertion loss, db maximum typical 80 90 100 0 10 20 60 70 30 40 50 1ghz 4ghz 12.4ghz8ghz 18ghz 26.5ghz frequency isolation, db minimum typical 1-(2). high frequency characteristics (transfer) sample: ard60012 measuring method: measured with hp network analyzer (hp8510). ?v.s.w.r. ?insertion loss ?isolation 1ghz 4ghz 12.4ghz8ghz 18ghz 26.5ghz 1.1 1.0 1.9 1.2 1.4 1.5 1.6 1.7 1.8 1.3 frequency v.s.w.r. maximum typical 0.8 0.9 1.0 0 0.1 0.2 0.6 0.7 0.3 0.4 0.5 1ghz 4ghz 12.4ghz8ghz 18ghz 26.5ghz frequency insertion loss, db maximum typical 1ghz 4ghz 12.4ghz8ghz 18ghz 26.5ghz 80 70 100 90 0 20 10 60 40 50 30 isolation, db frequency minimum typical 1-(3). high frequency characteristics (sp6t) measuring method: measured with hp network analyzer (hp8510). ?v.s.w.r. ?insertion loss ?isolation 1.0 2.0 1.9 1.8 1.7 1.6 1.5 1.4 1.3 1.2 1.1 1ghz 8ghz4ghz 13ghz 18ghz frequency v.s.w.r. maximum typical 1.0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1ghz 8ghz4ghz 13ghz 18ghz frequency insertion loss, db maximum typical 100 0 10 20 30 40 50 60 70 80 90 1ghz 8ghz4ghz 13ghz 18ghz isolation, db frequency minimum typical all rights rese r v ed c o p y r i gh t matsushita elect r ic w o r k s , ltd.
rd (ard) notes 1. coil operating power pure dc current should be applied to the coil. the wave form should be rectangular. if it includes ripple, the ripple factor should be less than 5%. however, check it with the actual circuit since the characteristics may be slightly different. the nominal operating voltage should be applied to the coil for more than 50 ms to set/reset the latching type relay. please use the latching type for circuits that are continually powered for long periods of time. 2. coil connection when connecting coils, refer to the wiring diagram to prevent mis-operation or malfunction. 3. connection of coil indicator and washing conditions 1) the connection of coil indicator terminal shall be done by soldering. soldering conditions max. 260? 500? (solder temp) within 10sec (soldering time) max. 350? 662? (solder temp) within 3sec (soldering time) 2) this product is not sealed type, therefore washing is not allowed. 4. conditions for operation, transport and storage conditions 1) ambient temperature, humidity, and atmospheric pressure during usage, transport, and storage of the relay: (1) temperature: ?5 to +85? ?7 to +185? (2) humidity: 5 to 85% rh (avoid freezing and condensation.) the humidity range varies with the temperature. use within the range indicated in the graph below. (3) atmospheric pressure: 86 to 106 kpa temperature and humidity range for usage, transport, and storage: 2) condensation condensation forms when there is a sudden change in temperature under high temperature and high humidity conditions. condensation will cause deterioration of the relay insulation. 3) freezing condensation or other moisture may freeze on the relay when the temperature is lower than 0? 32? . this causes problems such as sticking of movable parts or operational time lags. 4) low temperature, low humidity environments. the plastic becomes brittle if the relay is exposed to a low temperature, low humidity environment for long periods of time. 5) low-temperature and low-humidity atmosphere. when exposed to low temperature and low humidity for a long time, the relays plastic casing may become breakable. 5. other handling precautions. 1) the relays on/off service life is based on standard test conditions (temperature: 15 to 35? 59 to 95? , humidity: 25 to 75%) speci?d in jis c5442-1996. life will depend on many factors of your system: coil drive circuit, type of load, switching intervals, switching phase, ambient conditions, to name a few. 2) use the relay within speci?ations such as coil rating, contact rating and on/ off service life. if used beyond limits, the relay may overheat, generate smoke or catch ?e. 3) be careful not to drop the relay. if accidentally dropped, carefully check its appearance and characteristics before use. 4) be careful to wire the relay correctly. otherwise, malfunction, overheat, ?e or other trouble may occur. 5) the latching type relay is shipped in the reset position. but jolts during transport or impacts during installation can move it to the set position. it is, therefore, advisable to build a circuit in which the relay can be initialized (set and reset) just after turning on the power. 6) if a relay stays on in a circuit for many months or years at a time without being activated, circuit design should be reviewed so that the relay can remain non-excited. a coil that receives current all the time heats, which degrades insulation earlier than expected. a latching type relay is recommended for such circuits. 7) for sma connectors, we recommend a torque of 0.90?.1 n? for installation, which falls within the prescribed torque of mil-c-39012. please be aware that conditions might be different depending on the connector materials and how it interacts with surrounding materials. 8) please do not use silicon based substances such as silicon rubber, silicon oil, silicon coatings and silicon ?lings, in the vicinity of the relay. doing so may cause volatile silicon gas to form which may lead to contact failure due to the adherence of silicon on the contacts when they open and close in this atmosphere. 9) please note that when switching contacts (latching type only), you must apply reset (all) voltage and release all contacts ?st. (sp6t type) 10) do not use multiple contacts simultaneously. (sp6t type) tolerance range (avoid condensation when used at temperatures higher than 0 c 32 f ) (avoid freezing when used at temperatures lower than 0 c 32 f ) 5 85 temperature, c f humidity, %rh ?5 ?7 0 +32 +85 +185 all rights rese r v ed c o p y r i gh t matsushita elect r ic w o r k s , ltd.

▲Up To Search▲

Price & Availability of ARD32024

	To Download ARD32024 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .